OUR CERTIFICATIONS FREQUENTLY ASKED QUESTIONS

Drinking Water Systems Frequently Asked Questions

Yes. Public tap water in the United States must meet drinking water safety standards set by the Environmental Protection Agency (EPA). However, aging infrastructure and old plumbing may introduce contaminants such as lead, disinfection by-products, or sediment to the supply line. A home water filtration system will provide an additional layer of protection.

A Reverse Osmosis (RO) system may be beneficial depending on the quality of your tap water and specific health concerns, but it is not necessary for every home. RO systems are best suited for households looking to reduce dissolved solids, heavy metals, and certain contaminants from their drinking water.

Pros

• Removes contaminants such as arsenic, lead, and some bacteria
• Offers multi-stage filtration to reduce chlorine and other impurities
• Produces water with very low dissolved solids, improving taste and clarity  

Cons

• Removes beneficial minerals such as calcium magnesium, and potassium
• Less effective against Volatile Organic Compounds (VOCs) without carbon filtration
• Requires pre-filtration because chlorine can damage the membrane
• Wastes 4-7 gallons of water for every 1 gallon produced
• Storage tank is limited, so filtered water may take hours to replenish
• Multiple filters that need regular replacement to remain efficient
• The holding tank requires under sink space and plumbing set up

If your tap water quality is good, a carbon block filtration system may be sufficient and more cost-effective.

The best water filtration system for you depends on:

• The specific contaminants present in your water
• Your budget
• Installation Preference
• Maintenance Requirements

For example, point-of-use systems help reduce chlorine, heavy metals, lead, and other contaminants from your tap water.

• Whole house systems treat all the water entering your home for chlorine, chloramine, and limescale.

Your water utility company is required by the Environmental Protection Agency (EPA) to provide an annual Consumer Confidence Report (CCR), typically in July. Your CCR includes:

• The source of your drinking water
• Contaminants found and their levels
• Compliance with federal safety standards
• Potential health impacts

You can request this report directly from your local water utility company or find it on their website.

It depends on the type of water filtration system:

• Reverse Osmosis (RO) systems: Yes. RO systems rely on a semi-permeable membrane to block a wide range of contaminants, but this process also removes beneficial minerals such as calcium and magnesium.
• Solid Carbon Block Filters: No. Carbon block filters preserve healthy minerals while reducing contaminants such as chlorine, VOCs, PFAS and more. Because they rely on mechanical filtration and adsorption rather than a membrane, naturally occurring minerals remain intact.

Drinking Water Systems Frequently Asked Questions

Drinking Water Systems Frequently Asked Questions

Drinking Water Systems Frequently Asked Questions

Yes. Public tap water in the United States must meet drinking water safety standards set by the Environmental Protection Agency (EPA). However, aging infrastructure and old plumbing may introduce contaminants such as lead, disinfection by-products, or sediment to the supply line. A home water filtration system will provide an additional layer of protection.

A Reverse Osmosis (RO) system may be beneficial depending on the quality of your tap water and specific health concerns, but it is not necessary for every home. RO systems are best suited for households looking to reduce dissolved solids, heavy metals, and certain contaminants from their drinking water.

Pros

• Removes contaminants such as arsenic, lead, and some bacteria
• Offers multi-stage filtration to reduce chlorine and other impurities
• Produces water with very low dissolved solids, improving taste and clarity  

Cons

• Removes beneficial minerals such as calcium magnesium, and potassium
• Less effective against Volatile Organic Compounds (VOCs) without carbon filtration
• Requires pre-filtration because chlorine can damage the membrane
• Wastes 4-7 gallons of water for every 1 gallon produced
• Storage tank is limited, so filtered water may take hours to replenish
• Multiple filters that need regular replacement to remain efficient
• The holding tank requires under sink space and plumbing set up

If your tap water quality is good, a carbon block filtration system may be sufficient and more cost-effective.

The best water filtration system for you depends on:

• The specific contaminants present in your water
• Your budget
• Installation Preference
• Maintenance Requirements

For example, point-of-use systems help reduce chlorine, heavy metals, lead, and other contaminants from your tap water.

• Whole house systems treat all the water entering your home for chlorine, chloramine, and limescale.

Your water utility company is required by the Environmental Protection Agency (EPA) to provide an annual Consumer Confidence Report (CCR), typically in July. Your CCR includes:

• The source of your drinking water
• Contaminants found and their levels
• Compliance with federal safety standards
• Potential health impacts

You can request this report directly from your local water utility company or find it on their website.

It depends on the type of water filtration system:

• Reverse Osmosis (RO) systems: Yes. RO systems rely on a semi-permeable membrane to block a wide range of contaminants, but this process also removes beneficial minerals such as calcium and magnesium.
• Solid Carbon Block Filters: No. Carbon block filters preserve healthy minerals while reducing contaminants such as chlorine, VOCs, PFAS and more. Because they rely on mechanical filtration and adsorption rather than a membrane, naturally occurring minerals remain intact.

Drinking Water Systems Frequently Asked Questions

Drinking Water Systems Frequently Asked Questions

Yes. Public tap water in the United States must meet drinking water safety standards set by the Environmental Protection Agency (EPA). However, aging infrastructure and old plumbing may introduce contaminants such as lead, disinfection by-products, or sediment to the supply line. A home water filtration system will provide an additional layer of protection.

A Reverse Osmosis (RO) system may be beneficial depending on the quality of your tap water and specific health concerns, but it is not necessary for every home. RO systems are best suited for households looking to reduce dissolved solids, heavy metals, and certain contaminants from their drinking water.

Pros

• Removes contaminants such as arsenic, lead, and some bacteria
• Offers multi-stage filtration to reduce chlorine and other impurities
• Produces water with very low dissolved solids, improving taste and clarity  

Cons

• Removes beneficial minerals such as calcium magnesium, and potassium
• Less effective against Volatile Organic Compounds (VOCs) without carbon filtration
• Requires pre-filtration because chlorine can damage the membrane
• Wastes 4-7 gallons of water for every 1 gallon produced
• Storage tank is limited, so filtered water may take hours to replenish
• Multiple filters that need regular replacement to remain efficient
• The holding tank requires under sink space and plumbing set up

If your tap water quality is good, a carbon block filtration system may be sufficient and more cost-effective.

The best water filtration system for you depends on:

• The specific contaminants present in your water
• Your budget
• Installation Preference
• Maintenance Requirements

For example, point-of-use systems help reduce chlorine, heavy metals, lead, and other contaminants from your tap water.

• Whole house systems treat all the water entering your home for chlorine, chloramine, and limescale.

Your water utility company is required by the Environmental Protection Agency (EPA) to provide an annual Consumer Confidence Report (CCR), typically in July. Your CCR includes:

• The source of your drinking water
• Contaminants found and their levels
• Compliance with federal safety standards
• Potential health impacts

You can request this report directly from your local water utility company or find it on their website.

It depends on the type of water filtration system:

• Reverse Osmosis (RO) systems: Yes. RO systems rely on a semi-permeable membrane to block a wide range of contaminants, but this process also removes beneficial minerals such as calcium and magnesium.
• Solid Carbon Block Filters: No. Carbon block filters preserve healthy minerals while reducing contaminants such as chlorine, VOCs, PFAS and more. Because they rely on mechanical filtration and adsorption rather than a membrane, naturally occurring minerals remain intact.

Drinking Water Systems Frequently Asked Questions

Yes. Public tap water in the United States must meet drinking water safety standards set by the Environmental Protection Agency (EPA). However, aging infrastructure and old plumbing may introduce contaminants such as lead, disinfection by-products, or sediment to the supply line. A home water filtration system will provide an additional layer of protection.

A Reverse Osmosis (RO) system may be beneficial depending on the quality of your tap water and specific health concerns, but it is not necessary for every home. RO systems are best suited for households looking to reduce dissolved solids, heavy metals, and certain contaminants from their drinking water.

Pros

• Removes contaminants such as arsenic, lead, and some bacteria
• Offers multi-stage filtration to reduce chlorine and other impurities
• Produces water with very low dissolved solids, improving taste and clarity  

Cons

• Removes beneficial minerals such as calcium magnesium, and potassium
• Less effective against Volatile Organic Compounds (VOCs) without carbon filtration
• Requires pre-filtration because chlorine can damage the membrane
• Wastes 4-7 gallons of water for every 1 gallon produced
• Storage tank is limited, so filtered water may take hours to replenish
• Multiple filters that need regular replacement to remain efficient
• The holding tank requires under sink space and plumbing set up

If your tap water quality is good, a carbon block filtration system may be sufficient and more cost-effective.

The best water filtration system for you depends on:

• The specific contaminants present in your water
• Your budget
• Installation Preference
• Maintenance Requirements

For example, point-of-use systems help reduce chlorine, heavy metals, lead, and other contaminants from your tap water.

• Whole house systems treat all the water entering your home for chlorine, chloramine, and limescale.

Your water utility company is required by the Environmental Protection Agency (EPA) to provide an annual Consumer Confidence Report (CCR), typically in July. Your CCR includes:

• The source of your drinking water
• Contaminants found and their levels
• Compliance with federal safety standards
• Potential health impacts

You can request this report directly from your local water utility company or find it on their website.

It depends on the type of water filtration system:

• Reverse Osmosis (RO) systems: Yes. RO systems rely on a semi-permeable membrane to block a wide range of contaminants, but this process also removes beneficial minerals such as calcium and magnesium.
• Solid Carbon Block Filters: No. Carbon block filters preserve healthy minerals while reducing contaminants such as chlorine, VOCs, PFAS and more. Because they rely on mechanical filtration and adsorption rather than a membrane, naturally occurring minerals remain intact.